Product Updates

PIndex™

Production-Predictor-Log2

PIndex is an estimate of the well’s relative productivity. It shows a direct comparison of well productivity and identifies differences between wells, providing immediate feedback to adjust overall completion strategies.

Learn more about PIndex here

 

 

DIndex™

Production-Predictor-Log2

DIndex quantifies the well’s current and future reservoir drainage volume and drainage pattern. The result is a map of future incremental reservoir depletion, showing when drawdown pressures from adjacent wells will interact with each other. DIndex gives operators the control to adjust operating parameters and plan well spacing and production timing based on economic factors, maximizing ROI.

Learn more about DIndex here

 

PermIndex™

Production-Predictor-Log2

Developed to help reservoir engineers understand the reservoir permeability on a stage-by-stage basis, the proprietary PermIndex service provides permability estimates for each stage and data-driven contstraints to reservoir simulation to help operators improve production forecasting and increase estimated ultimate recovery (EUR). The new technology includes:

  • Production Productivity Log
  • Permeability Scalar

Learn more about PermIndex here

 

Advanced Real-Time Analysis

real-time-122

Developed to gain a deeper understanding of the reservoir and faster interpretation of data in real-time, MicroSeismc has enhanced its capabilities to give clients the opportunity to make critical adjustments at the well site in order to optimize production and reduce costs. Advanced Real-Time Analysis, represents both geophysical technology advances, as well as engineering developments. The new technology includes:

  • Automatic Moment Tensor Inversion
  • A Machine Learning Algorithm for Event Editing
  • Anisotropic Calibration

Learn more about Advanced Real-time Analysis here

 

PSET 5.0™

MSI DFN Illustration 05-13-13

MicroSeismic unveils the latest version of Passive Seismic Emission Tomography, PSET™ 5.0. With the new PSET™, customers enjoy high definition vertical resolution across the well and controlled amplitude processing.

  • High Definition Z-Resolution Across the Entire Well
  • Controlled Amplitude Processing
  • Improved Magnitudes for Well to Well and Basin to Basin Comparisons
  • Highly Accurate Models of Discrete Fracture Network

Learn more about PSET™ 5.0

 

Productive-SRV™

MicroSeismic. introduces Productive-SRV™ (Productive-Stimulated Reservoir Volume). The multiple patents pending technology introduces a novel method to estimate how much of the stimulated fracture remains open through proppant placement. Productive-SRV incorporates three microseismically derived calculations to estimate target zone productivity; a magnitude calibrated Discrete Fracture Network (DFN), the Propped Fracture Estimation and the Fat Fracture™ Drainage Estimation. The combination of these techniques can be used to estimate 90-day cumulative production.

Learn more about Productive-SRV™ and Hydraulic Fracture Monitoring & Mapping

MSI Downhole-Monitoring Single-Well 03-12-13 rev01-1Single well downhole acquisition

 

Product Updates

PSET 5.0™

MSI DFN Illustration 05-13-13

MicroSeismic, Inc. unveils the latest version of Passive Seismic Emission Tomography, PSET™ 5.0. With the new PSET™, customers enjoy high definition vertical resolution across the well and controlled amplitude processing.

  • High Definition Z-Resolution Across the Entire Well
  • Controlled Amplitude Processing
  • Improved Magnitudes for Well to Well and Basin to Basin Comparisons
  • Highly Accurate Models of Discrete Fracture Network

Learn more about PSET™ 5.0

Productive-SRV™

MicroSeismic, Inc. introduces Productive-SRV™ (Productive-Stimulated Reservoir Volume). The multiple patents pending technology introduces a novel method to estimate how much of the stimulated fracture remains open through proppant placement. Productive-SRV incorporates three microseismically derived calculations to estimate target zone productivity; a magnitude calibrated Discrete Fracture Network (DFN), the Propped Fracture Estimation and the Fat Fracture™ Drainage Estimation. The combination of these techniques can be used to estimate 90-day cumulative production.

Learn more about Productive-SRV™ and Hydraulic Fracture Monitoring & Mapping

MSI Downhole-Monitoring Single-Well 03-12-13 rev01-1Single well downhole acquisition

Downhole Monitoring with EventPick™ Technology

P-And S-Wave Arrival Picking

Real-time Microseismic Downhole Monitoring with EventPick™ Technology provides an independent evaluation of well stimulation results in areas less suitable for surface-based microseismic acquisition. Initial results, using the proprietary EventPick processing technology, are delivered within a month. The solution provides operators with the fracture geometry and azimuth, discrete fracture network characterization, estimations of propped stimulated reservoir volume, and recommendations for completions optimizations.

Learn more about Downhole Monitoring with EventPick™ Technology here

 

Product Updates

FracRx™

MSI HeatMap 300x200

Developed to help operators increase asset value by optimizing the treatment of each well, the proprietary FracRx service integrates microseismic data with an operator's geological  and pump data to track the growth of the fracture network in all directions and determine how the cumulative fracture area grows with injected fluid volume. The new technology includes:

  • Treatment Design Analysis
  • Cumulative Fracture Area Analysis

Learn more about FracRx here

 

Advanced Real-Time Analysis

real-time-122

Developed to gain a deeper understanding of the reservoir and faster interpretation of data in real-time, MicroSeismc has enhanced its capabilities to give clients the opportunity to make critical adjustments at the well site in order to optimize production and reduce costs. Advanced Real-Time Analysis, represents both geophysical technology advances, as well as engineering developments. The new technology includes:

  • Automatic Moment Tensor Inversion
  • A Machine Learning Algorithm for Event Editing
  • Anisotropic Calibration

Learn more about Advanced Real-time Analysis here

 

PSET 5.0™

MSI DFN Illustration 05-13-13

MicroSeismic unveils the latest version of Passive Seismic Emission Tomography, PSET™ 5.0. With the new PSET™, customers enjoy high definition vertical resolution across the well and controlled amplitude processing.

  • High Definition Z-Resolution Across the Entire Well
  • Controlled Amplitude Processing
  • Improved Magnitudes for Well to Well and Basin to Basin Comparisons
  • Highly Accurate Models of Discrete Fracture Network

Learn more about PSET™ 5.0

 

Productive-SRV™

MicroSeismic. introduces Productive-SRV™ (Productive-Stimulated Reservoir Volume). The multiple patents pending technology introduces a novel method to estimate how much of the stimulated fracture remains open through proppant placement. Productive-SRV incorporates three microseismically derived calculations to estimate target zone productivity; a magnitude calibrated Discrete Fracture Network (DFN), the Propped Fracture Estimation and the Fat Fracture™ Drainage Estimation. The combination of these techniques can be used to estimate 90-day cumulative production.

Learn more about Productive-SRV™ and Hydraulic Fracture Monitoring & Mapping

MSI Downhole-Monitoring Single-Well 03-12-13 rev01-1Single well downhole acquisition

 

Downhole Monitoring with EventPick™ Technology

P-And S-Wave Arrival Picking

Real-time Microseismic Downhole Monitoring with EventPick™ Technology provides an independent evaluation of well stimulation results in areas less suitable for surface-based microseismic acquisition. Initial results, using the proprietary EventPick processing technology, are delivered within a month. The solution provides operators with the fracture geometry and azimuth, discrete fracture network characterization, estimations of propped stimulated reservoir volume, and recommendations for completions optimizations.

Learn more about Downhole Monitoring with EventPick™ Technology here

Product Updates

Advanced Real-time Analysis

real-time-122

Developed to gain a deeper understanding of the reservoir and faster interpretation of data in real-time, MicroSeismc has enhanced its capabilities to give clients the opportunity to make critical adjustments at the well site in order to optimize production and reduce costs. Advanced Real-time Analysis, represents both geophysical technology advances, as well as engineering developments. The new technology includes:

  • Automatic Moment Tensor Inversion
  • A machine learning algorithm for Event Editing
  • Anisotropic Calibration

Learn more about Advanced Real-time Analysis here

 

PSET 5.0™

MSI DFN Illustration 05-13-13

MicroSeismic unveils the latest version of Passive Seismic Emission Tomography, PSET™ 5.0. With the new PSET™, customers enjoy high definition vertical resolution across the well and controlled amplitude processing.

  • High Definition Z-Resolution Across the Entire Well
  • Controlled Amplitude Processing
  • Improved Magnitudes for Well to Well and Basin to Basin Comparisons
  • Highly Accurate Models of Discrete Fracture Network

Learn more about PSET™ 5.0

 

Productive-SRV™

MicroSeismic. introduces Productive-SRV™ (Productive-Stimulated Reservoir Volume). The multiple patents pending technology introduces a novel method to estimate how much of the stimulated fracture remains open through proppant placement. Productive-SRV incorporates three microseismically derived calculations to estimate target zone productivity; a magnitude calibrated Discrete Fracture Network (DFN), the Propped Fracture Estimation and the Fat Fracture™ Drainage Estimation. The combination of these techniques can be used to estimate 90-day cumulative production.

Learn more about Productive-SRV™ and Hydraulic Fracture Monitoring & Mapping

MSI Downhole-Monitoring Single-Well 03-12-13 rev01-1Single well downhole acquisition

 

Downhole Monitoring with EventPick™ Technology

P-And S-Wave Arrival Picking

Real-time Microseismic Downhole Monitoring with EventPick™ Technology provides an independent evaluation of well stimulation results in areas less suitable for surface-based microseismic acquisition. Initial results, using the proprietary EventPick processing technology, are delivered within a month. The solution provides operators with the fracture geometry and azimuth, discrete fracture network characterization, estimations of propped stimulated reservoir volume, and recommendations for completions optimizations.

Learn more about Downhole Monitoring with EventPick™ Technology here

 

Product Updates | Q3 2012

pset-viewer

July 31, 2012: MicroSeismic, Inc. (MicroSeismic) announced today that it has introduced new technology and solutions with its next generation of services. The changes include an upgrade to the patented Passive Seismic Emission Tomography (PSET™) technology, introduction of Seismicity Monitoring services and the MicroSeismic Reservoir Intelligence (MRI) online portal, which will all be available Q3 2012. View the full press release.

PSET™ 4.0

MicroSeismic has upgraded its patented passive seismic monitoring, mapping and analysis process called PSET™ 4.0 with the following enhancements:

  1. PSET Monitoring – Improves imaging in low signal quality areas through the use of a new proprietary processing technique.
  2. PSET™ VTI (Vertical Transverse Isotropy) – Provides the ability to estimate and account for anisotropy to create more accurate velocity models.
  3. PSET™ Alert – Enhances real time capabilities to automatically trigger alerts based on customer defined criteria.
  4. PSET™ Viewer – Available online through the MRI Portal which allows customers to rapidly view their microseismic results in a 3D Viewer on their computer or tablet.

MicroSeismic Reservoir Intelligence (MRI) Portal

MicroSeismic now enables organizations to view their microseismic results in a single, online repository via the MRI (MicroSeismic Reservoir Intelligence) portal being rolled out to customers in Q3. The proprietary application provides a 3D view of PSET generated event sets and allows users to manipulate event set data for additional analysis.

seismicity-monitoring

Seismicity Monitoring

Based on proven and proprietary BuriedArray™ near-surface monitoring technology, Seismicity Monitoring provides customers a means to demonstrate that positive magnitude events which occur as a result of nearby natural seismicity are unrelated with fracturing or wastewater activity.

Additional Benefits:

  • Allow for on-going, low cost measurements of seismicity for a single pad, township or over a large region
  • Event resolution can be 10X better or more than available USGS/NRCan networks which helps to accurately pinpoint and demonstrate the safety of subsurface treatment activity

ML 0 and greater

 High
Resolution
Intermediate
Resolution
Coarse
Resolution
USGS
Resolution*
Township (< 50 sq miles) ± 50' ± 300' ± 5 miles
Extended (< 500 sq miles) ± 150' ± 600' ± 5 miles
Regional (> 500 sq miles) ± 2000' ± 5 miles
*USGS resolution for a ML 2.0 event

For additional information about the latest releases from MicroSeismic, please Contact Us.

MicroSeismic, Inc. trademarks are also registered marks in the USA, Canada and other nations.